SINOCTM is located in Ji′Nan city, Shandong province, SINOCTM aims to provide the project solutions with best cost performance to customers from China and abroad. Our main business are construction solutions consultancy, equipments supply, technical instruction, parts supply, service & training, logistic support and etc, providing the steward type service.
We cooperate with SINOTRUK, FOTON, SDLG, XCMG, Liugong, Shantui, Sany, Zoomlion, Hongda and other premium brands to provide tailored project solutions to your specific needs. We can help you to avoid long-time communication with different suppliers, which will save you time and cost. As to after market, with many years′ experience in the industry and long-term partnership with the suppliers, we do provide timely after market with lower cost and higher availability.
XGT63YD(5013-5) Hammerhead Tower Crane | ||||||
Type | XGT63YD(5013-5) | |||||
Basic height | 35m | |||||
Max height | 104m | |||||
Length | 50/45/40/35 m | |||||
Max load | 6T | |||||
Tip load | 1.3/1.46/1.8/2.15 T | |||||
Section material | Angle steel/Fixed | |||||
Items | Mechanism | Speed(m/min) | Rope capacity | Motor(Kw) | ||
Hoist mechanism | 18QT13TII | 2 multiplying power | 9/35/70 | 345m | 18/18/5 | |
4 multiplying power | 4.5/17.5/35.5 | >345M | ||||
Trolleying mechanism | 24BDZ50II | 40/20m/min | 2.4/1.5 | |||
Slewing mechanism | 55HR120 | 0-0.6r/min | 5.5 | |||
Travelling | RT | 0-24m/min | 2×5.2 | |||
Main Supply | 415V(±10%)/50Hz | |||||
Gross Power(Excluding climbing and travelling):25.9Kw | ||||||
Packing | Nude Pack.The packing of the commodity shall be in accordance with the export standard packing of the manufacturer,be suitable for long distance transportation of ocean and inland. The Seller shall be take measures against moisture,shocks and rust according to the special needs of the commodity. | |||||
The manufacturer reserves the right of technical alteration /change for better improvement without prior notice | ||||||
XGT63YD(5013-5) Internal climbing tower crane
1. It adopts PLC control. The special large-scale institutions have superior performance.
The mechanism operates smoothly, with small impact, low failure rate, and safety and reliability.
2. Use a large number of high-level connectors for fault diagnosis and maintenance.
3. The interchangeability of the tower body is high, and the lifting arm and balance arm
are connected with the slewing tower by a card-type connection, which is safe and convenient.
4. Use large number of Q345B steels, with high bearing capacity and long service life.
The introduction of joints is safe and reliable.