 |
BCJ-15 Porous granular
ANFO explosive site mixing and charging truck ZZ1317N3867A(BCJ-15)
| Quantity: | |
|---|---|
ZZ1317N3867A
SINOTRUK HOWO
Our company aims to provide the project solutions with best cost performance to customers from China and abroad. Our main business are construction solutions consultancy, equipments supply, technical instruction, parts supply, service & training, logistic support and etc, providing the steward type service.
BCJ-15 Porous granular ANFO explosive site mixing and charging truck SPECIFICATIONS | |||||
Serial number | Name | Quantity | Technical specification and accuracy | Manufacturer | |
1 | 5 motor valve group (ANFO)
| 1 set
| 5 motor + 2 manual valve block
| Yuci Hydraulics
| |
2 | ANFO screw | 1 | AY－DLX | BGRIMM EB | |
3 | porous granular ammonium nitrate box | 1
| 20000L | BGRIMM EB | |
4 | ANFO mixing screw | 1 | AY－HHLX | BGRIMM EB | |
5 | mixed charging truck chassis | 1 | HOWO ZZ1317N3867A(Left hand driving) | SINO TRUCK Ⅱ(371Hp) | |
6 | ANFO oblique screw | 1 | AY－XLX | BGRIMM EB | |
7 | cycloid motor | 1 | 2K-160 | Eaton (Jining) | |
8 | cycloid motor | 1 | 2K-395 | Eaton (Jining) | |
9 | cycloid motor | 1 | 2K-305 | Eaton (Jining) | |
10 | constant pressure pump- Vickers | 1 | PVM131 | Vickers, USA | |
11 | diesel oil tank | 1 | 1500L | BGRIMM EB | |
12 | Hydraulic oil cooler air cooling unit | 1 | FLJ-250 | Xinxiang, Henan | |
13 | Hydraulic oil tank and electro hydraulic proportional control hydraulic accessories（Import oil filter and air filter） | 1
| 500L | BGRIMM EB
| |
14 | oil metering pump | 1 | DM27 | Delta, USA | |
15 | axial piston motor | 1 | Domestic | ||
16 | hydraulic pipeline and connecting accessories | 1 | |||
17 | automatic control system | 1 | Integrate | ||
18 | vehicle assembly and empty system debugging | BGRIMM EB | |||
Size, mm | 10845×2550×3900 | ||||
truck chassis | SINO TRUCK HOWO, ZZ1317N3867A four axle truck chassis (EuroⅡ ) | ||||
Maximum speed, km/h | 80 | ||||
Maximum output power | 273kw | ||||
Maximum load | 16t single rear axle(double axles), 7t single front axle (double axles) | ||||
source of power | automobile engine | ||||
porous granular ammonium tank,m3 | 20 | ||||
texture of material | 304 stainless steel | ||||
diesel oil workbin, m3 | 1.5 | ||||
texture of material | 304 stainless steel | ||||
hydraulic oil tank, m3 | 0.5 | ||||
texture of material | 304 stainless steel | ||||
charging rate, kg/min | ≥400 | ||||
measurement error, % | ≤±2 | ||||
filled aperture, mm | ≥Φ90 | ||||
safety protection measures | hydraulic oil over temperature, diesel oil disconnection protection, chain start and stop | ||||
Packing | Nude Pack.The packing of the commodity shall be in accordance with the export standard packing of the manufacturer,be suitable for long distance transportation of ocean and inland. The Seller shall be take measures against moisture,shocks and rust according to the special needs of the commodity. | ||||
The manufacturer reserves the right of technical alteration /change for better improvement without prior notice | |||||
Working principle:
BCJ-15 Porous granular ANFO explosive site mixing and charging truck enters the blasting site loaded with porous granular ammonium nitrate and diesel oil; at the site, the raw material is mixed according to the vehicle system and then is charged into the blasting holes. The technological process is as follows.
(1) Load porous granular ammonium and diesel oil into the workbins and then drive the charging truck to the blasting site;
(2)Start the hydraulic system and adjust the hydraulic system pressure to the required value. The operator use a portable controller to swing and revolve cylinder to make the mixing screw aimed at the blasting hole automatically;
(3) Enter the ANFO explosives loading page, and set the charge quantity for a single hole and then click the button “automatic charging”. The charging system will start mixing screw, oblique screw, mixing screw and diesel oil pump according to the program setting order. Diesel and porous granular ammonium are mixed and then delivered into the blasting holes by mixing screw. When the charge quantity reaches the setting value, the charging will stop automatically and the charge quantity for a single hole is finished.
(4) Move the truck to the next blasting hole, repeat step 2 and 3 until all the charging is finished.
We are the agency for SINOTRUK wholesale truck series, we can supply HOWO tractor trucks, HOWO dump trucks, trailer truck, truck parts, agricultural machinery, Construction machinery and parts,HOWO concrete mixer trucks, special trucks and so on.we can supply trucks for our clients with good quality and competitive price, because we get directly support from the CNHTC factory.
Main products
1. Dump Truck / Tipper Truck
2. Hohan tractor Truck/ prime mover truck
3. Truck with crane / Truck mounted crane
4. Oil Tank Truck / Fuel Tanker Truck
5. Water truck / Water Tank Truck / Water Sprinkler Truck
6. Concrete Mixer Truck
7. Van truck / Insulated truck/ Refrigeration truck
8. Fecal suction truck / Sewage suction truck
9. Cement Powder Tank truck/ Bulk cement trailer
10. High-altitude operation truck
11. Semi Trailer ( flat bed trailer / skeleton trailer / dump trailer / side wall trailer / low bed trailer / container trailer, etc. )
