SINOCTM is located in Ji′Nan city, Shandong province, SINOCTM aims to provide the project solutions with best cost performance to customers from China and abroad. Our main business are construction solutions consultancy, equipments supply, technical instruction, parts supply, service & training, logistic support and etc, providing the steward type service.
We cooperate with SINOTRUK, FOTON, SDLG, XCMG, Liugong, Shantui, Sany, Zoomlion, Hongda and other premium brands to provide tailored project solutions to your specific needs. We can help you to avoid long-time communication with different suppliers, which will save you time and cost. As to after market, with many years′ experience in the industry and long-term partnership with the suppliers, we do provide timely after market with lower cost and higher availability.
XCMG GR180 MOTOR GRADER SPECIFICATIONS | |||
Engine model | 6CTA8.3-C190- | ||
Rated power/speed | kW/rpm | 142/2200 | |
Overall dimension (standard) | 8900x2625x3420 | ||
Total weight (standard) | kg | 15400 | |
Tire specification | 17.5-25 | ||
Ground clearance (front axle) | mm | 430 | |
Tread | mm | 2156 | |
Space of front and rear axles | mm | 6219 | |
Space of middle and rear wheels | mm | 1538 | |
Forward velocity | km/h | 5/8/11/19/23/38 | |
Reverse speed | km/h | 2005/11/23 | |
Tractive effort f=0.75 | kN | ≥79 | |
Maximum gradeability | % | ≥25 | |
Tire inflation pressure | kPa | 260 | |
Working system pressure | MPa | 18 | |
Transmission pressure | MPa | 1.3-1.8 | |
Maximum steering angle of front wheel | ±50° | ||
Maximum slant angle of front wheel | ±17° | ||
Maximum oscillating angle of front axle | ±15° | ||
Maximum oscillating angle of equilibrium box | Front15° Rear15° | ||
Maximum steering angle of frame | ±27° | ||
Minimum turning radius | m | 7.3 | |
Scrape knife | Maximum lift height | mm | 450 |
Maximum cutting depth | mm | 500 | |
Maximum tilt angle | 90° | ||
Cutting angle | 28°-90° | ||
Angle of revolution | 360° | ||
Length & chord height | mm | 3965x610 | |
Coolant | L | 50 | |
Fuel tank | L | 280 | |
Engine | L | 24 | |
Transmission | L | 38 | |
Drive axle | L | 28 | |
Balancing box | L | 46 | |
Packing | Nude Pack.The packing of the commodity shall be in accordance with the export standard packing of the manufacturer,be suitable for long distance transportation of ocean and inland. The Seller shall be take measures against moisture,shocks and rust according to the special needs of the commodity. | ||
The manufacturer reserves the right of technical alteration /change for better improvement without prior notice | |||
XCMG has eight series of GR Series Motor Graders, with their rated powers in the 100-550 hp range. They have reliable quality and stable performance, and have retained a dominant market share for many years.
1.The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.
2.The drive axle is a dedicated XCMG axle.
3.Rear axle main drive is equipped with "NO-SPIN" without self-locking differential. When one wheel slips, the other wheel can still transmit its original torque.
4.The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and reliable.
5.The sealed cab is used to configure the air conditioning system. The interior parts are sleek and compact plastic parts, which fully reflects the needs of ergonomics.