English
Filipino
Deutsch
Português
Español
Français

You are here: Home » Service » Service » The Repair Manual of SINOTRUK HOWO HC16 Drive Axle 5

The Repair Manual of SINOTRUK HOWO HC16 Drive Axle 5

Publish Time: 2022-02-23     Origin: Site

3. Sub-assembly Final Drive

    (1) Assemble driven bevel gear at                       (2) Install locking pieces and bearing

     differential

             (3) Install bearing outer ring                                             (4) Install driving wheel bearing

      

       (5) Assemble bearing                                (6) Drip thread lock glue in final

        block assembly                                        drive housing connection thread hole

    Preload shall be controlled in 1~2Nm          Plain shall be smeared with oil-resistant sealant

 

    (7) Use pneumatic wrench to preload symmetrically.

    Firstly, preload two bolts symmetrically

        (8) Assembly of two bearing outer rings is finished. Differential shall not be inclined. Adjust

       adjustable nuts slightly to adjust bearing pretension.

       (9) Use B16 pneumatic wrench to tighten            (10) Any adjustable gear side clearance

        nuts for preloading.                                              shall be controlled in 0.25~0.45mm.

      (11) Adjust strictly according to mesh area           (12) Bush cap nut torque shall be

          Requirements                                                        controlled in 210~260Nm  

       (13) Install locking plate and control torque            (14) Install fixed mesh cover to guarantee

        in 21~25Nm                                                            the torque in 200~240Nm

  (15) Use screwdriver to turn locking piece and locking edge over firstly,

  then tap it gently to guarantee locking effect.

We are the agency for SINOTRUK wholesale truck series, we can supply HOWO tractor trucks, HOWO dump trucks, trailer truck, truck parts, agricultural machinery, agricultural machinery parts,HOWO concrete mixer trucks, special trucks and so on.we can supply trucks for our clients with good quality and competitive price, because we get directly support from the CNHTC factory.

Main products

1. Dump Truck / Tipper Truck

2. Hohan tractor Truck/ prime mover truck

3. Truck with crane / Truck mounted crane

4. Oil Tank Truck / Fuel Tanker Truck

5. Water truck / Water Tank Truck / Water Sprinkler Truck

6. Concrete Mixer Truck

7. Van truck / Insulated truck/ Refrigeration truck

8. Fecal suction truck / Sewage suction truck

9. Cement Powder Tank truck/ Bulk cement trailer

10. High-altitude operation truck

11.Semi Trailer ( flat bed trailer / skeleton trailer / dump trailer / side wall trailer / low bed trailer / container trailer, etc. )

ABOUT SINOCTM

China truck and machinery internatioanal co,.Ltd (sinoctm) a top one stop package equipment solution provider in china especially for vehicle, construction machinery and mining equipment.    
 

CONTACT

    Address: Jinan City Shandong Province China.
   Phone:+86-18560197563  
                      +86-15562595282
   WhatsApp:+86-15562595282
  WeChat: +86-18560197563
   Email:  james@hwsinotruck.com               
Copyright  2021 China Truck And Machinery Internatioanal Co,.ltd. All Rights Reserved      leadong      sitemap