SINOCTM is located in Ji′Nan city, Shandong province, SINOCTM aims to provide the project solutions with best cost performance to customers from China and abroad. Our main business are construction solutions consultancy, equipments supply, technical instruction, parts supply, service & training, logistic support and etc, providing the steward type service.
We cooperate with SINOTRUK, FOTON, SDLG, XCMG, Liugong, Shantui, Sany, Zoomlion, Hongda and other premium brands to provide tailored project solutions to your specific needs. We can help you to avoid long-time communication with different suppliers, which will save you time and cost. As to after market, with many years′ experience in the industry and long-term partnership with the suppliers, we do provide timely after market with lower cost and higher availability.
Model | Feed Opening (mm) | Max feeding size (mm) | Discharge Size (mm) | Capacity (t/h) | Power(KW) |
ASJ-E42-30 | 1070×760 | 610 | 75-200 | 215-420 | 110 |
ASJ-E48-36 | 1220×910 | 730 | 75-220 | 280-570 | 160 |
ASJ-E54-42 | 1370×1070 | 860 | 100-220 | 395-720 | 185 |
ASJ-E60-48 | 1520×1220 | 1000 | 125-250 | 530-950 | 220 |
Description
ASJ-E jaw crusher has the characteristics of high capacity, jaw plate wear resistance, high degree of humanized operation, good stability, simple structure and appearance which is the suitable choice for crushing processing with compressive strength less than 300 mpa.
Features
1.“V” type of crushing chamber, effective opening size is equal to the nominal opening size (common jaw crusher adopts the traditional asymmetric crushing chamber structure, and effective opening size is smaller than nominal opening size)and the throughput capacity will be increased by15-20% compared with the normal crushing chamber.
2.The discharge opening of ASJ-E jaw crusher applies the hydraulic adjusting unit, the optimized chamber and motion parameter make the product have greater through capacity for same clearance.
3.Smaller discharge clearance for same through capacity. The main components of frame adopt high- quality manganese steel, thickening steel plate, and finite element analysis method is used to evaluate mechanical strength in the process of design to improve the load resistance and impact during using. Cold installation process for bearing and thin oil lubrication make service life prolonged and efficiency of the rotation improved.
4.Four humanized maintenance operation units adopted for easily damaged parts of ASJ - E: bolt fastening and spring removal unit, moving jaw maintenance unit, side guard plate removal unit, adjusting seat replacement unit, so maintenance personnel can easily have inspection, maintenance and care with the four units.
Working Principle
when the jaw crusher works, the electric motor drives V-belt to make the swing jaw up and down through eccentric shaft. When the swing jaw goes up, the angle between toggle plate and swing jaw gets bigger, and the materials can be crushed. When the swing jaw goes down, the angle between toggle plate and swing jaw becomes smaller, the swing jaw moves away from the fixed jaw plate, and then the crushed materials will be discharged from the lower outlet of the crushing chamber.