SINOCTM is located in Ji′Nan city, Shandong province, SINOCTM aims to provide the project solutions with best cost performance to customers from China and abroad. Our main business are construction solutions consultancy, equipments supply, technical instruction, parts supply, service & training, logistic support and etc, providing the steward type service.
We cooperate with SINOTRUK, FOTON, SDLG, XCMG, Liugong, Shantui, Sany, Zoomlion, Hongda and other premium brands to provide tailored project solutions to your specific needs. We can help you to avoid long-time communication with different suppliers, which will save you time and cost. As to after market, with many years′ experience in the industry and long-term partnership with the suppliers, we do provide timely after market with lower cost and higher availability.
LOVOL FL956H WHEEL LOADER SPECIFICATIONS | ||
Complete machine parameters | ||
Rated load(kg) | 5000 | |
Operating mass (standard)(kg) | 16950 | |
Bucket capacity(m³) | 3.0 | |
Boom lifting time(S) | 5.57 | |
Sum of three items(S) | 10.2 | |
Max. traction force(kN) | ≥160 | |
Max. breakout force(kN) | ≥175 | |
Working scope | ||
Outline dimension(mm) | 7700×2980×3430 | |
Wheelbase(mm) | 2920 | |
Track(mm) | 2250 | |
Min. grounding distance (at hinge position)(mm) | 480 | |
Max. unloading height(mm) | 3135 | |
Unloading distance at max. unloading height(mm) | 1195 | |
Engine parameters | ||
Model | Weichai WD10G220E23 | |
Type | Six-cylinder, in-line, direct injection, turbocharging, and water cooling | |
Rated power(Kw/rpm) | 162/2200 | |
Max. torque / speed(N.m/rpm) | 890// | |
Cylinder bore x stroke(mm) | Φ126Χ130 | |
Displacement(L) | 9.726 | |
Fuel consumption rate at rated working condition(g/Kw.h) | 210.5 | |
Fuel tank capacity (L) | 280 | |
Running system | ||
Forward speed range(km/h) | 42 | |
Backward speed range(km/h) | 17.5 | |
Gearbox shift | Front : 2 gears rear: 1gears | |
Max. gradeability(°) | 30 | |
Steering angle(°) | 37°+-1° | |
Tire model | 23.5-25 | |
Service brake | Single circuit, air-over-oil four-wheel caliper disc brake | |
Parking brake | flexible shaft control caliper disc brake | |
Tire center(mm) | 5665 | |
Outside of bucket(mm) | 6850 | |
Hydraulic system | ||
Working system pressure(Mpa) | 18 | |
Working system displacement(ml/r) | 100 | |
Steering system pressure(Mpa) | 16 | |
Steering system displacement(ml/r) | 80 | |
Hydraulic oil volume(L) | 210 | |
Packing | Nude Pack.The packing of the commodity shall be in accordance with the export standard packing of the manufacturer,be suitable for long distance transportation of ocean and inland. The Seller shall be take measures against moisture,shocks and rust according to the special needs of the commodity. | |
The manufacturer reserves the right of technical alteration /change for better improvement without prior notice | ||
Engine
For various high-dust working environments of the loader, the three-stage air filter is adopted to effectively reduce the early wear fault probability of the engine and extend the service life .
With multi-stage fuel filter, fuel adaptability is good,ensuring the cleanliness of the engine system.
Gearbox
The gearbox adopts the patented reinforced overrunning clutch, which improves the reliability life by 30%;
The bearings and oil seals at key locations adopt imported components and have higher reliability.
Hydraulic system
The hydraulic system consists of three small displacement pumps, each of which has small displacement, small volume, high bearing pressure and high reliability .
The hydraulic system filter element has a filtration ratio of 200 (99.5％ of impurities can be filtered out), thus the system is cleaner and more reliable.
Structural parts and articulation
With new reinforced frame and patented composite hinge structure, the super-bearing capacity has been fully verified by millions of impact fatigue experiments 1000 hours of strengthening experiments and 5000 hours of industrial experiment .
The bucket material adopts JF440 jointly developed with domestic famous steel mills, which has higher strength and better wear resistance;
The shaft sleeve adopts 20CrMnTi honeycomb shaft sleeve, and the inner surface adopts patented spraying process, and has self-lubrication function and long service life.
Braking system
The braking system is equipped with a drying and back-blowing water removal device to prevent pipeline corrosion and winter freezing, and the brake is more reliable and safer.
Reinforced drive axle
With optimized design of axle housing, the cross section is enlarged, the bearing on the wheel side is enlarged, and the bearing capacity of the front axle can reach 40t;
With reinforced main reduction and reinforced wheel edge, life is increased by 30%.