SINOCTM is located in Ji′Nan city, Shandong province, SINOCTM aims to provide the project solutions with best cost performance to customers from China and abroad. Our main business are construction solutions consultancy, equipments supply, technical instruction, parts supply, service & training, logistic support and etc, providing the steward type service.
We cooperate with SINOTRUK, FOTON, SDLG, XCMG, Liugong, Shantui, Sany, Zoomlion, Hongda and other premium brands to provide tailored project solutions to your specific needs. We can help you to avoid long-time communication with different suppliers, which will save you time and cost. As to after market, with many years′ experience in the industry and long-term partnership with the suppliers, we do provide timely after market with lower cost and higher availability.
Jk810 All in One Hydraulic DTH Drilling Rig | |||
General | Length | mm | 9920 (transport) |
Width | mm | 2400 | |
Height | mm | 3300 | |
Undercarriage | Track width | mm | 350 |
Ground clearance | mm | ≥400 | |
Track oscillation | ° | ±10° | |
Walking speed | km/h | 2 (low) / 3 (high) | |
Grade ability | ° | 20° | |
Engine | Model | QSL8.9-C360-30 | |
Type | Water-cooled six-cylinder EFI diesel engine | ||
Rated power | kw/rpm | 264/2100 | |
Fuel tank capacity | L | 450-500 | |
Air compressor | Model | Atlas Copco two-stage rotary screw air compressor | |
Working pressure | bar | 20 | |
Max. FAD | m3/min | 18.5 | |
Rotary motor | Rotation rate | rpm | 0-85 |
Max.rotation torque | Nm | 3300 | |
Feeding method | Hydraulic motor + Chain | ||
Feeding force | kN | 12 | |
Lifting force | kN | 18 | |
Feed | Feeding stroke | mm | 4840 |
Feed extension | mm | 1100 | |
Drill pipe changer | Drilling diameter | mm | Φ90 - Φ150 |
Drilling depth | m | 28 | |
Pipe diameter | mm | Φ76 | |
Pipe length | m | 4 | |
Pipe capacity | piece | 6+1 | |
Hammer specs | 4" - 5" | ||
Dust collector | Collecting method | Hydraulic dust collecting | |
The manufacturer reserves the right of technical alteration /change for better improvement without prior notice |
JK810 is an All-In-One hydraulic DTH drilling rig, which brings you more automation, higher working efficiency, better reliability and simpler operation.Atlas Copco air end built into the dril rig ensure the supplier of air.The FOPS-approved cabin and automatic rod exchange system come standard. Heavy-duty undercarriage with wide tracks ensures both extreme maneuverability and improved safety. The hydraulic dust collecting system meets the latest environmental protection regulations and it's a reliable solution to realize the modern green mining.